Fundamentals of OT Cybersecurity (ICS/SCADA)
For IT Cybersecurity professionals who want to learn about the Fundamental of OT (ICS/SCADA) Cybersecurity
Lo que serás capaz de hacer
After being in the field of Cybersecurity for many years, and a few years back I had to work on Operational Technology Cybersecurity. At that time I couldn’t find good resources to understand Operational Technology very well, Most of the time I found articles, videos, or outdated books! and they were misleading sometimes and confusing other times. And found some very expensive training that I couldn’t really afford at the time, however, out of studying, reading, hands on, and working as a Cybersecurity expert in the field of Operational Technology in the following years I found it’s really a good idea to make it easier for those who are going through the same path I had to go through, so I put this training together for you. This training is about Operational Technology Fundamentals, it will give you the key to understand the different systems within OT and get you ready to leverage your IT Cybersecurity knowledge in the world of OT. I Will begin by explaining the basic operations, then I will discuss and explain Distributed Control Systems, following to that will cover the subject of SCADA. Will continue to discuss the other OT terminology and differences with IT along with explaining the OT Network and Purdue Reference Model. At this point, you will have a good understanding of OT systems components and logical designs. Then will move into advanced subjects of OT protocols and communications, and will have deep technical dive into industrial protocol followed by several labs, and finally, in the last section, I will explain the OT Cybersecurity Controls and solutions. This course will be regularly updated, and presented with more bonus and gifts videos and some interesting and advanced subjects around OT Cybersecurity.
- Introduction to operational technology Cybersecurity
- Operational Technology terminology
- Distributed Control System (DCS)
- Supervisory Control And Data Acquisition (SCADA)
- Industrial Control Systems (ICS)
- IT / OT Gap and Convergence
Temario
UNIDAD 1 - Introduction to OT Components · 26 leccionesUNIDAD 1 - Introduction to OT Components
UNIDAD 1 - Introduction to OT Components
- Introduction
- Welcome Message!
- Use case 1 - Water tank storage
- Explaining the use case components
- Explaining the use case requirements
- What can be automated?
- Active / Passive Components
- Larger Scale
- Connection of Active components
- Data representation and conversion
- Data conversion with example
- Input / Output
- Field Devices types
- Note to avoid confusion
- The Control Logic
- The Control Logic actions
- Control Logic Cycle
- Operation and Safety Considerations
- Monitoring & Writing values
- Maintenance
- Maintenance - Answer to previous question
- Safety Instrumented System (SIS)
- SIS implementation
- Data Historian
- Quick Summary
- Quick Review
UNIDAD 2 - Introduction to Distributed Control System (DCS) · 16 leccionesUNIDAD 2 - Introduction to Distributed Control System (DCS)
UNIDAD 2 - Introduction to Distributed Control System (DCS)
- Introduction to Section 2
- Use Case - Product Manufacturer
- Production Phases
- Discrete vs Process Manufacturing
- Answer to question
- Answer to question
- Intro to DCS
- Plant / Control
- Distributed Control Systems
- DCS Controllers
- DCS Controller Programming Languages
- DCS Summary
- Operator station (HMI)
- DCS Layout - Eng WS
- Quick Summary
- Review Section 2
UNIDAD 3 - Supervisory Control And Data Acquisition (SCADA) · 12 leccionesUNIDAD 3 - Supervisory Control And Data Acquisition (SCADA)
UNIDAD 3 - Supervisory Control And Data Acquisition (SCADA)
- Introduction to section 3
- What is SCADA?
- SCADA main components
- SCADA Server (MTU)
- Programmable Logic Controller (PLC)
- Remote Terminal Unit (RTU)
- Programmable Automation Controller (PAC)
- Intelligent Electronic Device (IED)
- SCADA Alarms
- SCADA Connections
- Quick Summary
- Section review
UNIDAD 4 - Operational Technology vs Information Technology · 22 leccionesUNIDAD 4 - Operational Technology vs Information Technology
UNIDAD 4 - Operational Technology vs Information Technology
- Introduction
- OT Terminology
- Terms under Operational Technology
- IT / OT GAP
- IT Network design
- OT - Level 0
- OT - Level 1
- OT - Level 2
- OT - Level 3
- OT - Level 4
- OT - Level 5
- Purdue Reference Model
- IT Within OT (part 1)
- IT within OT (part 2)
- Question?
- IT vs OT Cybersecurity (quick comparison)
- Air-gapped OT networks
- IT vs OT (part 1)
- IT vs OT (part 2)
- IT vs OT (part 3)
- Quick Summary
- Review section
UNIDAD 5 - OT Communication and Protocols · 26 leccionesUNIDAD 5 - OT Communication and Protocols
UNIDAD 5 - OT Communication and Protocols
- Introduction
- Recap on Sensors and Signals
- Read Value
- Write Value
- Operational Technology Protocols by Industry
- Introduction to Modbus
- Modbus Communication types
- Modbus TCP Type
- PLC Memory Addresses
- PLC Memory Address types and values
- Modbus Request Format
- Modbus RTU and RTU over TCP Format
- Modbus TCP vs RTU
- Modbus TCP Segment
- Modbus Application Protocol Header
- Modbus Protocol Data Unit (PDU)
- Modbus TCP Request
- Decoding Modbus TCP Request
- Modbus Function Codes
- How to read the RFC (Modbus)
- LAB1: Modbus Simulator
- LAB2: Wireshark Analysis of Modbus (part 1)
- LAB2: Wireshark Analysis of Modbus (part 2)
- LAB3: Connect HMI to Modbus simulator
- Quick Summary
- Review section
UNIDAD 6 - Operational Technology Cybersecurity Controls · 15 leccionesUNIDAD 6 - Operational Technology Cybersecurity Controls
UNIDAD 6 - Operational Technology Cybersecurity Controls
- Introduction
- Why you need to understand OT?
- Network Assists Discovery
- Network Discovery (Agentless)
- Network Discovery (Visual)
- Endpoint Security
- Identity and Access Management (IAM)
- Intrusion Detection
- NGFW and Intrusion Prevention
- Network Access Control
- Secure Remote Access
- OT is insecure by design
- OT Cybersecurity Compliance
- Quick Summary
- Review section
Tu certificado lo emite la SEP, no solo una plataforma
Al demostrar la competencia recibes un certificado emitido por la Secretaría de Educación Pública a través del Gobierno del Estado de México: un documento oficial que puedes presentar con confianza ante cualquier empleador o institución.
Tu certificado con INEC
- Lo emite la Secretaría de Educación Pública (SEP), a través del Gobierno del Estado de México
- Documento oficial con folio verificable en línea
- Lo otorga la Universidad Tecnológica Fidel Velázquez
Otras plataformas en línea
- Constancia privada emitida por la misma plataforma
- Solo acredita horas cursadas o asistencia
- Sin respaldo de una autoridad educativa
Tu itinerario, de la inscripción al certificado
- 1
Inscripción con pago único
Pagas $2,800 MXN una sola vez y entras de inmediato al curso.
- 2
Estudias a tu ritmo
6 unidades con videos, lecturas y actividades, disponibles 24/7 durante 12 meses.
- 3
Cuestionarios por unidad
6 cuestionarios para comprobar lo aprendido.
- 4
Certificado
Emitido por la SEP a través del Gobierno del Estado de México, con folio verificable.
Un certificado oficial de la SEP
Muestra · verificable por folio y QR
- Emitido por la Secretaría de Educación Pública (SEP), a través del Gobierno del Estado de México. No es una constancia privada: es un documento oficial, y ese respaldo marca la diferencia frente a otras plataformas en línea.
- Contenido impartido por Nebras ALQURASHI.
- Folio y QR verificables para compartirlo con quien te contrate.
Empieza hoy, a tu ritmo
Un solo pago y acceso inmediato al curso completo durante 12 meses.
- 6 unidades · 117 lecciones · 30 h
- 12 meses de acceso
- 6 cuestionarios de evaluación
- Certificado emitido por la SEP (Gob. del Estado de México) con folio verificable
Sobre tu inscripción
¿Cómo es el pago?
Un solo pago de $2,800 MXN. No hay mensualidades ni cargos recurrentes.
¿Cuánto tiempo tengo acceso?
12 meses desde tu inscripción, 24/7, para avanzar a tu ritmo.
¿Quién imparte el contenido?
El curso es impartido por Nebras ALQURASHI; INEC gestiona tu inscripción, evaluación y certificado.
¿Qué pasa cuando vence mi acceso?
Puedes renovar tu cuenta tú mismo desde la plataforma, sin trámites ni esperas.
